Abhay steels stock the largest single site stainless steel sheets/ plates inventory. We manufacture and supply SS products under the set industrial norms and globally approved standards. We are an ISO certified company and this certification is achieved by our hard work and dedication towards top-notch production process. We supply our products in various standard and non-standard dimensions for multiple applications in industries.
Stainless steel sheets- it is thinner than 6 mm. These are ideal to use for building structures where durability is not required. Often it is corrugated or diamonded that provide additional strength to it without further increase in weight. Corrugation process is the creasing of the sheet at regular intervals. Diamonding is the addition of diamond ridges that add structural stability.
Stainless steel plate- SS plate has the thickness more than 6mm. In the application where durability is required these plates are used, however, the weight will increase. Mostly, it is used in the automobile sectors.
ASTM A240 SS Sheets | ASME SA240 Stainless Steel Sheets | SS Shim Sheets | SS Sheets Supplier | Hot Rolled Stainless Steel Sheet | Stainless Steel Sheets Stockist | Jindal Stainless Steel Sheets | Stainless Steel Cold Rolled Sheets | Stainless Steel HR Sheets | 2B Finish SS Sheets | SS CR Sheets | Stainless Steel BA Finish Sheets Dealer | Stainless Steel Matt PVC Sheets | Stainless Steel Sheets Cut To Size
ASTM A240 SS Plates | ASME SA240 Stainless Steel Plates | Jindal Stainless Steel Plates | Stainless Steel Checkered Plates | SS Plates Supplier | Hot Rolled Stainless Steel Plate | Stainless Steel Plates Stockist | Stainless Steel Cold Rolled Plates | Stainless Steel HR Plates | 2B Finish SS Plates | SS CR Plates | Stainless Steel BA Finish Plates | Stainless Steel Matt PVC Plates Dealer
The only difference between stainless steel sheets and plates is the thickness. Both used in different uses, depending on the application durability and requirements of end applications.
SS grade is the molybdenum austenitic stainless steel which offers good resistance to general corrosion. It is conventionally used grade and now it is divided into different grades that vary on the chemical composition. It offers higher creep and stress to rupture and elevated tensile strength. It has excellent corrosion resistance and strength properties. It also provides excellent formability and fabricability which typically found in the austenitic grades.
Stainless steel sheets/ plates are often utilized in the process streams that contain high levels of halides or chlorides. In addition to molybdenum, it improves pitting and general corrosion. These are also available in both low and higher version of carbon content makes it dual certified. The lower carbon composition with the addition of nitrogen enables to attain required mechanical properties.
Standards : ASTM A240 / ASME SA240
Range : 5mm To 150mm
Thickness : 4.0mm - 100mm)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
SS Sheets Size Ranges : Thickness: 0.25mm ~ 6.0mm ;Width: 600mm ~ 2000mm ;Length: 1000mm ~ 10000mm
SS Plates Size Ranges : Thickness: 3mm to 100mm;Width: 1000mm to 3000mm;Length: 2438 mm / 3048mm / 6098 mm to 12500 mm
Also, it resists atmospheric corrosion as well as, in the moderate and dense environments. Moreover, it resists corrosion in the polluted seawater. Ss sheets and plates have excellent resistance to intergranular corrosion and even in the welded condition. These have excellent toughness and strength at the lower temperatures.
When it is annealed, its structure turns into non-magnetic in nature. It also becomes magnetic when it is processed from the cold working operations or welding operations. Importantly, it is weldable by all the standard shop fabrication operations. The hot working temperature of SS is between 927 deg c to 1204 deg c. For maximum properties it is also annealed up to 1038 deg c. However, these are readily cold worked. This operation will increase the strength and hardness of sheets and plates. Might be it will be subjected to work hardening during fabrication, thus best machining results can be achieved in the annealed condition.
Quality of stainless steel sheets/ plates is checked by performing different quality tests. These tests confirm the reliability of the products. The main tests include destructive and noon-destructive tests.
| Steel Grade | Bendability: Bending Angle | Proof Stress (N/mm² MIN.) | Bendability: Inside Radius | Tensile Stress (N/mm² MIN.) | HRB MAX. Hardness | % MIN. Elongation | HBW MAX. Hardness |
|---|---|---|---|---|---|---|---|
| S30400 / SUS304 | No Require | 205 | - | 515 | 92 | 40 | 201 |
| S30100 | No Require | 205 | - | 515 | 95 | 40 | 217 |
| S31008 | No Require | 205 | - | 515 | 95 | 40 | 217 |
| S43000 / SUS430 | 180° | 205 | 1.0 x thickness | 450 | 88/89 | 22/22A | 183 |
| S30403 / SUS304L | No Require | 170 | - | 485 | 90/92 | 40 | 201 |
| S32100 | No Require | 205 | - | 515 | 95 | 40 | 217 |
| S31603 / SUS316L | No Require | 170 | - | 485 | 90/95 | 40 | 217 |
| S41000 | 180° | 205 | - | 450 | 96 | 20 | 217 |
| Steel Grade | Other | Cr% | Ni% | C% Max. | Mn% Max. | Si% Max. | P% Max. | Mo% Max. | S% Max. | Ti% Max. |
|---|---|---|---|---|---|---|---|---|---|---|
| SUS430 / S43000 | - | 16.0–18.0 | 0.6 / 0.75 | 0.12 | 1 | 0.75 / 1 | 0.04 / 0.045 | - | 0.03 | - |
| SUS304L / S30403 | N: 0.1 Max. | 18.0–20.0 | 9.0–13.0 / 8.0–12.0 | 0.03 | 2 | 1 / 0.75 | 0.045 | - | 0.03 | - |
| SUS304 / S30400 | N: 0.1 Max. | 18.0–20.0 / 17.5–19.5 | 8.0–10.5 | 0.08 / 0.07 | 2 | 1 / 0.75 | 0.045 | - | 0.03 | - |
| SUS316L / S31603 | N: 0.1 Max. | 16.0–18.0 | 12.0–15.0 / 10.0–14.0 | 0.03 | 2 | 1 / 0.75 | 0.045 | 2.0–3.0 | 0.03 | - |
| S30100 | N: 0.1 Max. | 16.0–18.0 | 6.0–8.0 | 0.15 | 2 | 1 | 0.045 | - | 0.03 | - |
| S31008 | - | 24.0–26.0 | 19.0–22.0 | 0.08 | 2 | 1.5 | 0.045 | - | 0.03 | - |
| S32100 | N: 0.1 Max. | 17.0–19.0 | 9.0–12.0 | 0.08 | 2 | 0.75 | 0.045 | - | 0.03 | 5(C+N)–0.70 |
| S41000 | - | 11.5–13.5 | 0.75 | 0.08–0.15 | 1 | 1 | 0.04 | - | 0.03 | - |
| S43932 | N: 0.03 Max., Al: 0.15 Max., Nb+Ti: [0.20 + 4(C + N)]–0.75 | 17.0–19.0 | 0.5 | 0.03 | 1 | 1 | 0.04 | - | 0.03 | - |
| Thickness (in. / mm) | Width 36 in. (914.4 mm) | Width 48 in. (1,219 mm) |
|---|---|---|
| 0.017–0.030 (0.43–0.76) | 0.0015 (0.038) | 0.002 (0.051) |
| 0.031–0.041 (0.79–1.04) | 0.002 (0.051) | 0.003 (0.076) |
| 0.042–0.059 (1.1–1.5) | 0.003 (0.076) | 0.004 (0.10) |
| 0.060–0.073 (1.5–1.9) | 0.003 (0.076) | 0.0045 (0.11) |
| 0.074–0.084 (1.9–2.1) | 0.004 (0.10) | 0.0055 (0.14) |
| 0.085–0.099 (2.2–2.5) | 0.004 (0.10) | 0.006 (0.15) |
| 0.100–0.115 (2.5–2.9) | 0.005 (0.13) | 0.007 (0.18) |
| 0.116–0.131 (2.9–3.3) | 0.005 (0.13) | 0.0075 (0.19) |
| 0.132–0.146 (3.4–3.7) | 0.006 (0.15) | 0.009 (0.23) |
| 0.147–0.187 (3.7–4.7) | 0.007 (0.18) | 0.0105 (0.2) |
Oil and Gas Pipeline | Chemical Industry | Plumbing | Water Supply Systems | Power Plant | Paper & Pulp Industry | General Purpose Applications | Fabrication Industry | Food Processing Industry | Structural Pipe
Exporter & Supplier of High Quality Stainless Steel Sheets, Plates in Different Special Size and Thickness in India.
Stainless Steel Plates and Sheets Packing
Stainless Steel Plates and Sheets is sleeved into plastic bag individually, pieces wrapped with water-proof material, such as Copper and other bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. SS Sheet packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.
People Also Searched For
ss sheet size chart, ss sheet weight chart, ss sheets supplier in mumbai, stainless steel sheets stockist in mumbai, stainless steel sheet thickness, ss sheet price list india, stainless steel plates supplier in mumbai, india.
16 gauge stainless steel sheet price, stainless steel plates stockist in india, stainless steel sheet price list, stainless steel round hole punched plate, SS Sheet gauge chart, stainless steel plate thickness.
stainless steel plate thickness chart, ss plate price, ss sheet price in delhi, ss plate standard size, stainless steel plate price, 1/8 inch stainless steel plate, no.4 stainless steel plate.
stainless steel plate weight, ss 1mm sheet price, stainless steel plate cut to size, stainless steel plate sizes, stainless steel plate material specification, stainless steel plate #4 finish.
