Home > Products > Stainless Steel 420 Perforated Sheets


Abhay Steels is the best industry that is extensively dealing as the reputable fabricator, supplier, stock-holder and exporter of Stainless Steel 420 Perforated Sheets. We are the best trader of the high quality of comprehensive ranges of AISI 420 sheets to the global and local buyers. No doubt today we have got greater popularity across the globe because of fairly dealing with the well-regarded patrons and offering them the sheets in specifications that vary in standards, sizes, surface, finishes, wall thickness, length, width, hardness, etc. It is also made available to them at custom-made specifications as per the demands our esteem clients are having.

Alloy information-
Stainless steel 420 is the harden-able stainless steel with very good strength, hardness as well as wears resistance. This alloy is pre-heated to the temperature rating at 760 deg C to 815 Deg C and then is heated to a temperature ranging 1100 deg C to 1205 Deg C. Ideally the forging must be cooled in the furnace that held at 845 deg C. The air cooling after the forging might cause cracking. Followed by annealing, forging is done but cool to the room temperature below annealing (not forged below 900 Deg C).

To harden it, heating is done at 1010 to 1065 Deg C and quenched in warm oil. To have greater hardness and corrosion resistance, tempering is carried out between 150 to 205 Deg C addition to air cooling. It will thus provide hardness of Rc 52. To ensure high corrosion resistance, this grade mustn’t be tempered over 430 Deg C.

STAINLESS STEEL 420 PERFORATED SHEETS, MANUFACTURER SUPPLIER IN MUMBAI INDIA

Stainless Steel 420 Perforated Sheets Supplier

SS 420 Perforated Sheets

Stainless Steel 420 Square Hole Perforated Sheets | 420 Stainless Steel Sheet | ASTM A240 SS 420 Perforated Sheets | ASME SA240 Stainless Steel 420 Perforated Sheets | Stainless Steel 420 Hot Rolled Perforated Sheets | SS 420 Perforated Sheets Supplier | 420 Stainless Steel Perforated Sheets Stockist | Jindal Stainless Steel 420 Perforated Sheets | Stainless Steel 420 Cold Rolled Perforated Sheets | 420 Stainless Steel HR Perforated Sheets | 2B Finish SS 420 Perforated Sheets | SS 420 CR Perforated Sheets | Stainless Steel 420 8 Finish Perforated Sheets | Stainless Steel 420 Perforated Sheets Dealer

SS 420 Perforated Sheets Supplier

420 Perforated Sheets

Stainless Steel S42010 Perforated Sheets | UNS S42010 Round Hole Perforated Sheets | 1.4021 Perforated Sheets | SUS 420 Perforated Sheets | SS 1.4021 Perforated Sheets | ASME SA240 Stainless Steel 420 HR Perforated Sheets | Jindal Stainless Steel S42010 Perforated Sheets | Stainless 420 Perforated Sheets Supplier | Hot Rolled 420 Stainless Steel Perforated Sheets | S42010 Stainless Steel Perforated Sheets Stockist | Stainless Steel 1.4021 Cold Rolled Perforated Sheets | Stainless Steel 420 BA Finish Perforated Sheets

Product development-
The development of SS 420 DIN 1.4201 perforated sheets is done by effectively using the superior quality of raw materials that we have sourced from reliable market mills. The alloy used is 100% pure and is certified. The use of sophisticated technology and modern tools has added greater strength to the quality of perforated sheets. The availability of professionals has allowed us to develop the superior quality of sheets as they are guiding the workers at all stages of product development. UNS S42000 sheets are fabricated as per national and international product quality standards.

Sheets testing-
Before the shipping of the Stainless steel 420 perforated sheets, its testing is conducted so that all industrialists could receive the superior quality of 1.4021 420 sheets. The testing conducted are namely hardness test, pitting resistance test, chemical test, mechanical test, flattening test, flaring test, macro test, micro test, intergranular corrosion test, and positive material identification test.


Standards : ASTM A240 / ASME SA240

Length : 1000mm to 6000mm

Width : 1000mm To 2000mm or customized

Thickness : 0.3mm - 15mm

Surface : 2B,BA,HL,Brush,No.1,No.4,8K,SB,etc.

Sizes : 1000mm*2000mm,1250mm*2500mm,1219mm*2438mm,1500mm*3000mm

contact

Sheets documenting-
When we are delivering the ASTM ASME A240 420 Stainless steel sheet to the clients we are doing the documenting. It means that we are attaching the copies of all important certificates and reports and providing it to the clients. Some of those are like quality assurance plan, raw material traceability report, material test report, packaging list, heat treatment chart, IBR test report, PMI test report, Mechanical-chemical test report. Also, we provide MTC as per En 10204/3.1b, 100% radiography test report, buyers report, third party test report, etc.


Stainless Steel 420 Perforated Sheets Grades Specification

Grade UNS DIN EN BS SIS JIS AISI
SS 420 S42010 1.4021 X20Cr13 420S29 / 420S37 2303 SUS420J1 420
Grade C Si Mn P S Cr
SS 420 0.16 - 0.25 1.00 1.5 max 0.04 0.015 12 - 14
Tensile Strength Elongation Hardness (HRB) max
650-950 10 - 12 % 230

Industries We Serve

Oil and Gas Pipeline | Chemical Industry | Plumbing | Water Supply Systems | Power Plant | Paper & Pulp Industry | General Purpose Applications | Fabrication Industry | Food Processing Industry | Structural Pipe

Exporter & Supplier of High Quality Stainless Steel 420 Perforated Sheets in Different Special Size and Thickness in India.

Industry ApplicationsIndustriesOil and Gas Industry

People Also Searched For

stainless steel 420 perforated sheet size chart, 420 stainless steel perforated sheets stockist in mumbai, 420 stainless steel perforated sheet thickness, ss 420 perforated sheet price list, 420 round holes staggered pitch, ss 420 perforated sheets supplier in mumbai, india, stainless steel 420 perforated sheets supplier in mumbai, india, 420 round holes square pitch

420 stainless steel round hole perforated sheets, stainless steel 420 perforated sheets thickness, ss 420 perforated sheet weight chart, 420 stainless steel perforated sheet price in india, 420 stainless steel perforated sheet price list , 420 round holes deep square pitch, stainless steel 420 perforated sheets stockist in mumbai, 420 round holes deep staggered pitch

price of stainless steel 420 perforated sheets, 420 stainless steel perforated sheets, ss 420 perforated sheets standard size, ss 420 perforated sheet price in delhi, 420 square holes square pitch, 420 square holes staggered pitch, stainless steel 420 perforated sheets thickness chart, ss 420 perforated sheets price

420 slot holes square pitch, ss 420 perforated sheet price in india, 420 stainless steel perforated sheets sizes, 420 slot holes staggered pitch, stainless steel 420 perforated sheets weight, stainless steel 420 perforated sheets material specification, stainless steel 420 perforated sheets cut to size, stainless steel 420 perforated sheets price

GET IN TOUCH

Contact Us

  • Office Address
    3rd Khetwadi, Lifescapes Harihar, 2nd Floor,
    Office No – 13, Mumbai–400004, India.
  • Warehouse Address
    Plot No 1424, K.W.C Steel Market,
    Road No 27, Panvel, Navi Mumbai - 410218.
OUR GLOBAL REACH
Our Global Reach